Home / Services / Structural drying

Structural Drying and Dehumidification in Apex, NC

Removing the water is only half the job. The moisture that soaked into walls, framing and subfloors has to be dried out and measured.

24/7 emergency lineApex, NC · 27502 · 27523 · 27539
The short answer

Structural drying is the use of air movers, dehumidifiers and moisture meters to pull water out of walls, floors, framing and other materials after the standing water is gone. It matters because materials look dry long before they are, and moisture left inside them is what leads to warping, odor and mold. A fan alone moves air around; it does not remove moisture from it.

Right now

What to do while drying equipment is running

Keep the equipment runningDo not unplug or switch off dehumidifiers and air movers to save power or reduce noise. Stopping early is how a job ends up wet again.
Keep doors and windows closed in the drying areaOutside air, especially in a humid Southeast summer, works against the dehumidifiers.
Do not move or reposition equipmentIt is placed to move air in a specific pattern. Call if a cord or unit is in the way.
Keep children and pets clearCords, hot exhaust and moving air are hazards.
Ask how progress is trackedReadings on affected materials should be taken and written down, and compared with a dry reference.
How it works

What structural drying involves

  • Moisture mapping. Meters show which materials are wet and how wet, including areas you cannot see.
  • Air movers. Fans that push air across wet surfaces so moisture leaves the material and enters the air.
  • Dehumidifiers. Equipment that pulls that moisture out of the air so it does not settle back into the structure.
  • Monitoring. Temperature, humidity and moisture readings are repeated and equipment is adjusted as materials dry.
  • A dry standard. Readings on the affected materials are compared with the same material in an unaffected part of the home.
Avoid these mistakes

What not to do

  • Do not rely on open windows and box fans. In a humid climate they can add moisture, and they do not reach inside walls and under floors.
  • Do not stop early because it feels dry. Surfaces dry first. Wall cavities, subfloors and framing take longer.
  • Do not close up walls or lay new flooring on damp materials. You will trap moisture.
  • Do not skip records. Moisture logs are proof of what was done and support an insurance claim.
The process

The structural drying process

1

Extract standing water

Water is removed first so drying equipment is not fighting a flood.

2

Measure and map

Initial readings set the baseline and show where equipment is needed.

3

Set the equipment

Air movers and dehumidifiers are placed for the size of the space and the materials involved.

4

Open hidden cavities if needed

Small openings let air reach wet insulation and framing.

5

Check and adjust

Readings are repeated and equipment is moved or removed as materials dry.

6

Confirm and document

Final readings show the structure has returned to a normal level.

Related

Related water damage help in Apex

Emergency water extraction

Standing water removed fast so floors and walls stop absorbing it.

Burst pipe water damage

Drying and repair after a supply line splits or freezes.

Storm and roof leak damage

Rain through the roof, windows or walls after a storm.

Basement and crawl space water

Groundwater, sump failures and damp lower levels.

General information, not legal or insurance advice.

Common questions

Frequently asked questions

How long does structural drying take?

It depends on the materials, how much water got in, the category of water, the humidity and how fast drying began. The job is done when readings show the materials are dry, not on a fixed number of days.

Why do I need a dehumidifier and not just fans?

Fans move moist air around and help materials release water. A dehumidifier removes that water from the air. Without it, the moisture stays in the house. The EPA suggests keeping indoor humidity under 60 percent, ideally 30 to 50 percent.

Can I stay in my home during structural drying?

Often yes for clean-water losses, though the equipment is loud and takes up space. If the water was contaminated or the area is unsafe, you may need to stay elsewhere. Ask your restoration company.

Will drying equipment raise my electric bill?

It can, since the equipment runs for days. Keep a note of when it ran and ask your insurer whether the extra electricity use is part of a covered claim.

Need help now

Water damage can’t wait. Call now.

Tell us what happened and what is wet. We will talk you through the next steps. Our line is open 24/7.

Call (919) 503-3409
Call (919) 503-3409